Not sublimatable
You cannot sublimate a Stanley Quencher
The Quencher H2.0 fails on two independent counts: a powder coat finish that sublimation ink cannot bond to, and a fixed handle that makes a full wrap physically impossible even if it could.
Why it will not work
Why the coating says no
Stanley publishes the physical numbers, which we record because they are useful for judging dupes: 11.02 in tall, 3.1 in base diameter, 3.54 x 5.43 in across the handle. What it does not publish, anywhere, is a sublimation anything, because the product is not made for it.
What the listings do not tell you
The whole "40oz quencher dupe" category of sublimation blanks exists because of this page's search. Worth knowing before you size artwork: the sublimation-ready dupes run roughly an inch shorter than the real thing, 9.85 to 10 in against Stanley's 11.02, so a wrap sized off a real Quencher will not fit the blank you can actually press.
Source: stanley1913.com (manufacturer, verified). Verified 3 Aug 2026.
Same shape, right coating
Buy one of these instead
MakerFlo 40oz Tumbler
Wrap 12.9 x 5.75 in
a 40oz handled quencher shape with a published two-piece template and a twist-off handle, so the barrel is a true full-wrap surface
See the full specHPN SubliCraft 40oz Travel Mug w/ Straw and Handle
Wrap 9 x 5.19 in
HPN's 40oz with straw and handle; its published imprint is a partial panel because the fixed handle interrupts the wrap
See the full specHogg 40oz Traveler
No published wrap size; page shows what is
Hogg's 40oz with a removable handle, so a full wrap is achievable; no published wrap size, so measure
See the full specStanley questions makers ask
Can you sublimate a Stanley cup?
No. The Quencher is powder coated, so sublimation ink has nothing to bond to, and its handle does not come off, so a 360-degree wrap cannot be applied either.
Are 40oz sublimation quencher blanks the same size as a Stanley?
No, and it matters for artwork: documented sublimation dupes run about 9.85 to 10 in tall against the real Quencher's 11.02 in. Size your wrap to the blank you are pressing, not to a Stanley.
How is a real Stanley decorated then?
Laser engraving, UV printing and vinyl. Those work on powder coat; sublimation does not.
Other brands in the library
Seamless wraps, sized honestly
Every CraftPixelFusion design is drawn at wrap proportions for the 20oz skinny, straight and tapered versions together on most listings, and the listed size is the size you get.