Mecolour size chart
22oz Stainless Tumbler (dual lids) dimensions
No published wrap size
Mecolour does not publish a wrap size for this model, and this library never guesses. Everything it does publish is below: the body runs a 2.953 in bottom diameter (9.28 in around, derived).
Work it out with the calculatorWhat to measure on your blank
No drawable numbers for this blank
The sources do not publish enough dimensions to draw this model honestly, so here is what to measure on the cup in your hand.
- Top circumference. Tape measure around the top rim, where the print area starts. Measured straight across instead? That is the diameter; times pi gives the circumference.
- Bottom circumference. Tape around the base of the body. On many cups it is smaller than the top, and that difference is the whole story of wrap shapes.
- Height, without the lid. Base to rim of the metal body only. The lid never counts, and the charts here all state height without lid.
- The taper. If the top and bottom measurements differ, the wall slants. That slant is the taper, and it decides whether your wrap is a rectangle or a curve.
- Where the wrap sits. The shaded band: from just under the lid lip down to just above the base. Your design height is the height of this band, not of the whole cup.
Every published number
| Spec | Value | Source |
|---|---|---|
| Capacity | 22 oz | mecolour.com (verified) |
| Shape | Tapered | mecolour.com (verified) |
| Sublimatable | Yes | mecolour.com (verified) |
| Top diameter | 2.283 in | mecolour.com (verified) |
| Top circumference | 7.17 in | derived: diameter x pi |
| Bottom diameter | 2.953 in | mecolour.com (verified) |
| Bottom circumference | 9.28 in | derived: diameter x pi |
All figures verified 3 Aug 2026 against the linked sources. Moulds shift between production runs: if a wrap must fit first time, measure your own cup and check it with the wrap size calculator.
Notes from our research file
mecolour.commanufacturer source, verified
REVERSE TAPER: top 5.8cm is NARROWER than bottom 7.5cm. A conventional wrap will not fit. Included because it breaks the standard cone-unwrap assumption in the wrong direction and is a genuine calculator edge case. No print size published.
read the source Verified 3 Aug 2026.
22oz Stainless Tumbler (dual lids) questions
What size wrap does the Mecolour 22oz Stainless Tumbler (dual lids) take?
No wrap size is published for this model, and this library does not guess. The published physical dimensions are on this page. Measure your cup's circumference with a flexible tape, add 0.25 in of overlap for a straight body, and the wrap size calculator will do the tapered maths if the top and bottom differ.
Is the Mecolour 22oz Stainless Tumbler (dual lids) straight or tapered?
Tapered: the top and bottom differ, so a true full wrap is a curved (annular sector) shape rather than a rectangle. A rectangle sized to the larger circumference will overlap unevenly.
Where does this number come from?
Every figure on this page links to the public page it was read from, with the source tier and the date we verified it (3 Aug 2026). Derived values, like a circumference computed from a published diameter, are labelled as derived.
Other 22 oz blanks
Wraps to press on it
Sized honestly, pressed happily
Every CraftPixelFusion listing states its exact pixel dimensions, and the seamless patterns hide the wrap seam by design. Instant download on Etsy.